Instalare Hl Booster Tutorial

[gaby]

HL Booster este un plugin de Metamod care reduce lagul jucatorilor, dar foloseste mai multe resurse ale calculatorului (De obicei, este folosit de serverele de counter strike, care sunt hostate pe calculatoare performante, dar au o conexiune la internet slaba).

Pentru inceput, trebuie sa downloadati HL Booster 2.40 (Ultima versiune) de aici:

Dupa ce il dezarhivati, trebuie sa il puneti in Server cs/cstrike/addons/ creem un folder cu numele "booster" (fara ghilimele), dupa care copiati booster_mm.dll in acest folder. In Server cs/cstrike/addons/metamod/plugins.ini adaugam linia:

win32 addons/booster/booster_mm.dll

!!! Linia de mai sus, trebuie adaugata dupa statsme_mm.dll (in caz ca folositi si Statsme), altfel vor aparea mici erori. Mergeti apoi, in Server cs/cstrike/addons/booster si creati un fisier de extensie .cfg cu numele booster.cfg in care scrieti:

booster_show_connmsg 1 

booster_autofps 200 

booster_minsleepms 5 

booster_force_systicrate 0 

booster_cpu_enabled 0 

booster_cpu_spikemax 3 

booster_cpu_spikelevel 75 

booster_cpu_floor 50 

booster_cpu_mminc 2 

booster_cpu_quiettime 300 

booster_cpu_mmmin 3 

booster_cpu_mmmax 8 

booster_lite_mode 3 

booster_lite_extra_sleep_frequency 0[/code]




[color=red][i]Daca vreti sa modificati, ceva din configuratia de mai sus, uitati-va peste:[/i][/color]

[b]Configurarea se face astfel: [/b]

// booster_show_connmsg x (0 = disabled, 1 = small message, 2 = large message) 

// Shows a console message to players with booster information when they connect. 

booster_show_connmsg 1 



// booster_autofps x (x = 0 to 1000, 0 = no target FPS) 

// Automatically changes value of sys_ticrate to achieve and maintain the desired server FPS (if possible). 

// It is not recommended to target FPS greater than 200 or so. 

// Note that autofps adjusts sys_ticrate, which makes it incompatible with any booster_lite_mode other 

// than 3. Setting booster_autofps will force booster_lite_mode to 3. 

booster_autofps 200 



// booster_minsleepms x (x = 1 to 10, 10 = no change to multimedia timer) 

// This adjusts the multimedia system timer to trick HLDS into sleeping for less time. Note that 

// the lower the value set, the higher the CPU consumption will be for HLDS. Values lower than 3 

// are not recommended, as they can cause massive CPU consumption and/or system instability. 

booster_minsleepms 5 



// booster_force_systicrate x (x = 0 to 10000, 0 = let Booster2 manage the value itself (no force)) 

// Booster2 will force this sys_ticrate value. Note that using this option will set booster_autofps to 0 

// and booster_lite_mode to 3, as these methods rely on a sys_ticrate value untouched by user settings. 

// You should avoid directly setting sys_ticrate in your server.cfg, as manually adjusted values can 

// cause problems with various parts of Booster2. 

booster_force_systicrate 0 



// booster_cpu_enabled x [0 to 2] (0 = off, 1 = on, 2 = report CPU only - don't actively manage CPU) 

// Booster2 can monitor CPU usage and adjust the multimedia timer to reduce load when necessary 

booster_cpu_enabled 0 



// booster_cpu_spikemax x 

// If CPU management is enabled, number of times booster_cpu_spikelevel needs 

// to be exceeded in order for mmtimer to increase and CPU load to be reduced. 

booster_cpu_spikemax 3 



// booster_cpu_spikelevel x [0 to 100] 

// If CPU management is enabled, level which CPU utilization needs to exceed 

// (booster_cpu_spikemax times) for mmtimer to increase and CPU load to be reduced. 

booster_cpu_spikelevel 75 



// booster_cpu_floor x [0 to 100] 

// If CPU management is enabled, level which CPU utilization needs to stay under 

// (for booster_cpu_quiettime seconds) for mmtimer to decrease and FPS to increase. 

booster_cpu_floor 50 



// booster_cpu_mminc x [1 to 10] 

// If CPU management is enabled, amount mmtimer will increment (Booster2 will also decrease 

// the mmtimer by 1 for every 5 minute period that booster_cpu_spikelevel is not exceeded. 

booster_cpu_mminc 2 



// booster_cpu_quiettime 

// Seconds required without CPU spike exceeding booster_cpu_floor before 

// mmtimer value is decreased by 1. 

booster_cpu_quiettime 300 



// booster_cpu_mmmin x [1 to 10] 

// If CPU management is enabled, Booster2 will never set the mmtimer below this value. 

booster_cpu_mmmin 3 



// booster_cpu_mmmax x [1 to 10] 

// If CPU management is enabled, Booster2 will never set the mmtimer above this value. 

booster_cpu_mmmax 8 



// booster_lite_mode x [0 to 3] 

// Controls how the Booster-Lite approach is implemented: 

// 0 - HLDS sleeps 10ms if no network packets are received. If HLDS 

// receives a packet, it stops sleeping. (this mode has been added 

// to provide backward compatibility with how BL v1.00 worked). 

// 1 - HLDS attempts to sleep 10ms. If a packet is received, 

// HLDS stops sleeping. Otherwise it attempts to sleep another 10ms. 

// 2 - HLDS attempts to sleep 50ms. If a packet is received, it stops sleeping. 

// 3 - HLDS will sleep the standard amount (this value turns this feature off). 

booster_lite_mode 3 



// booster_lite_extra_sleep_frequency x 

// Forces HLDS server to sleep x milliseconds even if a packet is received. 

// This setting helps to lower CPU usage. 

booster_lite_extra_sleep_frequency 0 



// booster_stats_cpu_counter 

// Sets the string Booster will use to query cpu performance. By default this is 

// "\Processor(_Total)\% Processor Time". Manually set this only if you need to 

// support non-english counter names or to query a specific processor. 

// This cvar is only used if booster_cpu_enabled is turned on. 



// booster_stats_in_counter 

// Sets the string Booster will use to query bandwidth in. By default this is 

// "\Network Interface(NDIS 5.0 driver)\Bytes Received/sec". Manually set this only 

// if you need to support non-english counter names or to query a specific interface. 

// This cvar is only used if booster_stats is turned on. 



// booster_stats_out_counter 

// Sets the string Booster will use to query bandwidth out. By default this is 

// "\Network Interface(NDIS 5.0 driver)\Bytes Sent/sec". Manually set this only 

// if you need to support non-english counter names or to query a specific interface. 

// This cvar is only used if booster_stats is turned on. 



// booster_stats [0-1] 

// This turns on statistics gathering. This options is not supported. See info at the end 

// of the readme regarding this option. 



// booster_trigger_cmd 

// Sets a command to be executed the first time (during any given map) that CPU consumption 

// trips booster_cpu_spikemax. This allows admins to do things such as turn off wallhack 

// blocks or other CPU intensive systems under heavy load. 



// booster_intping 

// This is a read-only value, and holds the current average player ping. 



// booster_extping 

// This is a read-only value, and holds the current ping to the address set in booster_pingaddr. 



// booster_pingaddr 

// Sets the address (in IP format x.x.x.x) that Booster will ping once a minute. If no value is 

// set, Booster won't ping anything. Pinging an external address is useful in helping determine 

// latency issues. If clients are showing high ping, pings to a nearby router can help determine 

// if the problem is close to the server or part of something that is beyond the administrator's 

// control.

Dupa ce am adaugat linile de mai sus, mergeti in [color=green][b]Server cs/cstrike/server.cfg[/b][/color] si adaugati linia:

[code]exec addons/booster/booster.cfg

Succes